Trigger

Source

• DI
  

Definition: Serial number of the DI used by the trigger.

Description: Not available

• EMC

What it means: Use EMC as the trigger source.

Description: Not available

• externalControl
  Allows external control of the widget.

What it means: Use an external schema as a trigger source.

Description: Not available

• motorinfo

Definition: Use motor information as a trigger source.

Description: Not available

motorName

Definition: Refers to the name of the motor.

Description: Not available

useCurrent

What it means: Whether to take current conditions into consideration

Description: Not available

Current

Meaning: Current trigger value.

Description: Not available

userTemp

What it means: Whether to use temperature.

Description: Not available

Temperature

Temperature Trigger Value:

Description: Not available

Stop

When the motor is stopped

Description: Not available

err

Whether there is an error in the motor.

Description: Not available

EMC

Whether the motor is disabled.

Description: Not available

errCode

Definition: The trigger value for an error code, represented in hexadecimal format starting with 0x.

Description: Not available

Type

• risingEdge
  Indicates the signal transition from low to high.

The rising edge triggers.

Description: Not available

• fallingEdge signal
  

Falling edge trigger.

Description: Not available

func

• suspendTask
  Suspends the execution of a task.

What it means: To temporarily stop a task.

Description: Not available

• resumeTask()
  

Proceed with the task.

Description: Not available

• cancelTask()
  

What it means: Cancel a task.

Description: Not available

• releaseControl
  Functionality to control the release of a product.

What it means: Release control.

Description: Not available

• recycleControl
  Controls whether the recycle bin is enabled for the site collection. The default value is true.

Take back control.

Description: Not available

• powerOffDriver()
  

Disable the relay

Description: Not available

• powerOnDriver
  Turns on the driver.

What it means: Power on relay.

Description: Not available

• openDO

What it means: Open DO

Description: Not available

• closeDO()
  

What it means: Disable Digital Output

Description: Not available

• switchToSRCControl()
  

What it means: Switch to internal control.

Description: Not available

• switchToExternalControl()
  

What it means: Switch to external control.

Description: Not available

• navToTarget
  Navigates to the specified target.

Go to the destination

Description: Not available

• resetMotor()
  

Zero Motorcycles

Description: Not available

• clearMotorFault
  Clears any fault that may have occurred in the motor.

Clear motor errors.

Description: Not available

• toggleDO()
  

What it means: Flip DO.

Description: Not available

• enableMotor
  Enables or disables the motor.

Activate a motor

Explanation:

• motorName
  Specifies the name of the motor.

Definition: Name of a motor

Description: Not available

• disableMotor
  Disables the motor.

To turn off the motor

Description: Not available

• motorName
  Specifies the name of the motor.

Definition: Name of a motor

Description: Not available

• runScript
  Runs the specified script file.

What it means: Run the script.

Description: Not available

Name

Definition: Script Name

Note: xxxx.py

args

Definition: JSON script

Description: Not available

• repowerDriver

Turn on the drive

Description: Not available

• delayBeforePowerOff
  Specifies the delay time (in seconds) before the device powers off after a shutdown command is issued.

The delay before the power is cut off.

Description: Not available

- delayBeforePowerOn

The Delay Before Power-On

Description: Not available

• reopenDO
  

Power on the DO again.

Description: Not available

• DO

2. DO

Description: Not available

• delayBeforeCloseDO
  Specifies the delay time (in milliseconds) before the DirectOutput device is closed after the last command is sent to it. Default is 1000.

A delay before closing.

Description: Not available

• delayBeforeOpenDO
  Specifies the delay time (in milliseconds) before opening the drop-down list.

A delay before opening.

Description: Not available